Aavolyn is a Manufacturer and Supplier of
High Quality Compressor Replacement Parts
All Categories > Rod and Wiper Packing > Cast Iron TY210 Packing Rings > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Cast Iron TY210 Packing Rings

Check up to five results to perform an action.

Single acting radial-tangent pairs consist of a radial load ring and a tangent sealing ring. The pair act together as a seal in one direction. The Type 210 are installed in combinations depending on the discharge pressure. They keep the gas from leaking from the cylinder to atmosphere. The radial ring is pinned to the tangent or sealing ring to prevent gas from leaking at the tangent joint. The pair of rings seal at the bore and against the back side. To obtain an effective seal the finish and parallelism of the faces are critical. Proper side clearance is required for the packing to function at operating temperatures and not be restricted in the packing case groove.



   
  Results 1 - 25 of 96 1 2 3 4 

Aavolyn #

Cylinder/ Rod Diameter

Material

10011-21001-010 1.750 Cast Iron
10011-21021-012 2.000 Cast Iron
10011-21021-014 2.250 Cast Iron
30011-21001-005 1.250 Cast Iron
30011-21001-006 1.375 Cast Iron
30011-21001-007 1.500 Cast Iron
30011-21001-010 1.750 Cast Iron
30011-21001-012 2.000 Cast Iron
30011-21001-014 2.250 Cast Iron
30011-21002-019 2.750 Cast Iron
30011-21011-006 1.375 Cast Iron
30011-21011-010 1.750 Cast Iron
30011-21021-006 1.375 Cast Iron
30011-21021-007 1.500 Cast Iron
30011-21021-012 2.000 Cast Iron
40011-21001-006 1.375 Cast Iron
40011-21001-010 1.750 Cast Iron
40011-21001-012 2.000 Cast Iron
40011-21001-014 2.250 Cast Iron
40011-21002-019 2.750 Cast Iron
40011-21011-010 1.750 Cast Iron
40011-21021-012 2.000 Cast Iron
50011-21001-006 1.375 Cast Iron
50011-21001-010 1.750 Cast Iron
50011-21001-012 2.000 Cast Iron
  Results 1 - 25 of 96 1 2 3 4