Aavolyn is a Manufacturer and Supplier of
High Quality Compressor Replacement Parts
All Categories > Piston Rings and Rider Rings > TY450 Solid Rider Rings > AVA5015 TY450 Solid Rider Rings > Aavolyn # 56-45901-071  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Aavolyn # 56-45901-071, AVA5015 TY450 Solid Rider Ring



Solid riders or wear rings, AAVOLYN Type 450, are required where the ring groove on the piston travels out into the valve area or cylinder counterbore. The solid, stretch on ring is designed to stretch over the piston diameter and then fit tightly on the ring groove. Proper strain and memory considerations are important to ensure that the solid ring remains tightly on the piston during operating temperatures and pressures. Pressure relief designs are available in high temperature applications where riders have a tendency to come loose on the piston in service. This allows gas, trapped under the ring, to bleed away, thus eliminating rapid wear of the ring and possible breakage.





Specifications

Cylinder/ Rod Diameter

12.153

Material

AVA5015

Material Description

  • Throughout the Specialty Gas industry AVA5015, is recognized as the finest material available for use in Oxygen and Argon service. It was specifically developed for Oxygen bearing gases. No other product comes close to the wear properties exhibited by this patented PTFE blend. The proprietary fillers in AVA5015 form a surface film with excellent frictional characteristics. This film increases the life of the sealing ring three to five times that of other filled PTFE.
    The specific percentage and type of filler, as well as particle size, molding procedures, and sintering cycles are critical to the development of the surface film.
  • When combined with the PBU pressure balanced piston ring & packing designs, AVA5015. significantly reduces surface generated frictional heat. Every major specialty gas manufacturer has verified the performance of this unique material over any products available on the market today. Specific application performance data can be obtained on request.
  • Substitute materials have been offered for use in Oxygen or Argon applications, resulting in reduced ring life. The glass/moly filled and straight glass filled PTFE exhibit 1/2 to 1/3 the seal life when substituted for the AAVOLYN product. Once the AVA5015 seals seat after installation, wear rates drop substantially. This proprietary material eliminates wear on the sealing surfaces such as piston grooves, cylinder walls and piston rods & limits ring wear.
Recommended Usage: Oxygen, Argon, Air Though out the Specialty Gas Industry AVA5015 is recognized as the finest material available for Oxygen service.