Aavolyn is a Manufacturer and Supplier of
High Quality Compressor Replacement Parts
All Categories > Rod and Wiper Packing > Bronze TY211 Packing Rings > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Bronze TY211 Packing Rings

 
Check up to five results to perform an action.

The Type 211 pair of packing rings consist of two tangent to the step rings pinned together to overlap at the step. This design has traditionally been used to seal low pressure or vacuum applications. The pair of tangent rings allows the 211 style to seal in both directions. Because of the large sealing surface, more frictional heat is generated and therefore greater wear to the piston rod and the seal itself. The 211 design does not allow gas to pass back through the packing case when pressure drops from discharge to suction in the cylinder, therefore its application should be limited to low pressures such as after the vent connection, vacuum service or in partition packings.



   
  Results 26 - 50 of 53 1 2 3 

Aavolyn #

Cylinder/ Rod Diameter

Material
01-21101-007 1.500 Bronze
01-21121-009 1.625 Bronze
01-21101-010 1.750 Bronze
01-21123-012 2.000 Bronze
01-21132-012 2.000 Bronze
01-21101-012 2.000 Bronze
01-21122-013 2.125 Bronze
01-21123-014 2.250 Bronze
01-21132-014 2.250 Bronze
01-21101-014 2.250 Bronze
01-21122-017 2.500 Bronze
01-21142-017 2.500 Bronze
01-21102-017 2.500 Bronze
01-21102-019 2.750 Bronze
01-21102-024 3.250 Bronze
01-21102-026 3.500 Bronze
01-21102-030 4.000 Bronze
01-21121-010 1.750 Bronze
01-21131-010 1.750 Bronze
01-21144-024 3.500 Bronze
01-21102-032 4.500 Bronze
01-21120-004 1.125 Bronze
01-21131-012 2.000 Bronze
01-21143-015 2.312 Bronze
01-21121-014 2.250 Bronze
  Results 26 - 50 of 53 1 2 3