Aavolyn is a Manufacturer and Supplier of
High Quality Compressor Replacement Parts
All Categories > Rod and Wiper Packing > Bronze TY210 Packing Rings > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Bronze TY210 Packing Rings

Check up to five results to perform an action.

Single acting radial-tangent pairs consist of a radial load ring and a tangent sealing ring. The pair act together as a seal in one direction. The Type 210 are installed in combinations depending on the discharge pressure. They keep the gas from leaking from the cylinder to atmosphere. The radial ring is pinned to the tangent or sealing ring to prevent gas from leaking at the tangent joint. The pair of rings seal at the bore and against the back side. To obtain an effective seal the finish and parallelism of the faces are critical. Proper side clearance is required for the packing to function at operating temperatures and not be restricted in the packing case groove.



   
  Results 26 - 50 of 153  1 2 3 4 5 »  

Aavolyn #

Cylinder/ Rod Diameter

Material

40001-21011-010 1.750 Bronze
40001-21001-014 2.250 Bronze
40003-21001-014 2.250 Bronze
40001-21011-001 0.750 Bronze
40001-21002-030 4.000 Bronze
40001-21002-019 2.750 Bronze
40001-21044-024 3.250 Bronze
50001-21002-024 3.250 Bronze
50001-21011-006 1.375 Bronze
50001-21001-006 1.375 Bronze
50001-21021-010 1.750 Bronze
50001-21021-006 1.375 Bronze
50001-21001-010 1.750 Bronze
50001-21011-010 1.750 Bronze
50001-21001-012 2.000 Bronze
50001-21002-017 2.500 Bronze
50001-21001-014 2.250 Bronze
50001-21002-030 4.000 Bronze
60001-21042-014 2.250 Bronze
60001-21042-017 2.500 Bronze
60001-21054-022 3.000 Bronze
60001-21011-006 1.375 Bronze
60001-21001-006 1.375 Bronze
60001-21021-010 1.750 Bronze
60001-21021-006 1.375 Bronze
  Results 26 - 50 of 153  1 2 3 4 5 »