All Categories > Rod and Wiper Packing > Cast Iron TY251 Pressure Breaker Packing Rings > View Items  

Cast Iron TY251 Pressure Breaker Packing Rings

 
Check up to five results to perform an action.

The pressure breaker is used to stabilize the packing in the compressor. It is bored slightly over the rod diameter to allow a controlled leakage at the bore of the ring. This breaking down of the pressure in the first packing cup allows a slow buildup and drop off of pressure on each stroke.



  Results 1 - 16 of 16 1 

Aavolyn #

Cylinder/ Rod Diameter

Material
11-25103-012 2.000 Cast Iron
11-25103-014 2.250 Cast Iron
11-25121-006 1.375 Cast Iron
11-25122-013 2.125 Cast Iron
11-25122-017 2.500 Cast Iron
11-25123-012 2.000 Cast Iron
11-25123-014 2.250 Cast Iron
11-2512X-004 1.125 Cast Iron
11-25152-026 3.500 Cast Iron
13-25101-004 1.125 Cast Iron
13-25102-017 2.500 Cast Iron
13-25102-030 4.000 Cast Iron
13-25104-034 5.000 Cast Iron
13-25132-014 2.250 Cast Iron
13-25142-017 2.500 Cast Iron
13-25101-014 2.250 Cast Iron
  Results 1 - 16 of 16 1