Aavolyn is a Manufacturer and Supplier of
High Quality Compressor Replacement Parts
All Categories > Rod and Wiper Packing > Aavolyn # 60056-22003-624  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Aavolyn # 60056-22003-624, AVA5015 TY220/230 Packing Ring Set








Specifications

Cylinder/ Rod Diameter

3.250

Material1

AVA5015

Quantity

6

Material Description

  • Throughout the Specialty Gas industry AVA5015, is recognized as the finest material available for use in Oxygen and Argon service. It was specifically developed for Oxygen bearing gases. No other product comes close to the wear properties exhibited by this patented Teflon® blend. The proprietary fillers in AVA5015 form a surface film with excellent frictional characteristics. This film increases the life of the sealing ring three to five times that of other filled Teflon®.
    The specific percentage and type of filler, as well as particle size, molding procedures, and sintering cycles are critical to the development of the surface film.
  • When combined with the PBU pressure balanced piston ring & packing designs, AVA5015. significantly reduces surface generated frictional heat. Every major specialty gas manufacturer has verified the performance of this unique material over any products available on the market today. Specific application performance data can be obtained on request.
  • Substitute materials have been offered for use in Oxygen or Argon applications, resulting in reduced ring life. The glass/moly filled and straight glass filled Teflon® exhibit 1/2 to 1/3 the seal life when substituted for the AAVOLYN product. Once the AVA5015 seals seat after installation, wear rates drop substantially. This proprietary material eliminates wear on the sealing surfaces such as piston grooves, cylinder walls and piston rods & limits ring wear.
Recommended Usage: Oxygen, Argon, Air Though out the Specialty Gas Industry AVA5015 is recognized as the finest material available for Oxygen service.
1 Teflon® PTFE is a trademark or registered trademarks of E. I. du Pont de Nemours and Company or its affiliates. All rights reserved.