Aavolyn is a Manufacturer and Supplier of
High Quality Compressor Replacement Parts
All Categories > Rod and Wiper Packing > Bronze TY313 Wiper Packing Rings > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Bronze TY313 Wiper Packing Rings

Check up to five results to perform an action.

This AAVOLYN Type 313 oil wiper ring is used in reciprocating compressors to prevent oil from the crankcase traveling along the piston rod and into the pressure packing. It consists of an individual oil seal manufactured tangent to the rod with no clearance at the bore. Each ring is an independent seal with a deep wiping edge and wide oil groove at the I.D. The oil groove acts as a second wiping edge and uses drilled holes to allow the wiped oil to drain away from the rod. AAVOLYN uses a tapered wiping edge on the face of the ring to more effectively strip the oil coating from the piston rod.



   
  Results 1 - 25 of 33 1 2 

Aavolyn #

Cylinder/ Rod Diameter

Sort by

Material

01-31352-004 1.125 Bronze
30001-31343-005 1.250 Bronze
30001-31343-006 1.375 Bronze
20001-31343-006 1.375 Bronze
30001-31363-006 1.375 Bronze
01-31343-006 1.375 Bronze
30001-31343-007 1.500 Bronze
30001-31363-007 1.500 Bronze
01-31353-007 1.500 Bronze
01-31363-008 1.562 Bronze
20001-31363-009 1.625 Bronze
30001-31343-010 1.750 Bronze
30001-31363-010 1.750 Bronze
01-31343-010 1.750 Bronze
01-31363-010 1.750 Bronze
30001-31343-012 2.000 Bronze
20001-31363-012 2.000 Bronze
01-31343-012 2.000 Bronze
01-31363-012 2.000 Bronze
01-31363-014 2.250 Bronze
30001-31363-014 2.250 Bronze
30001-31343-014 2.250 Bronze
01-31343-014 2.250 Bronze
01-31363-017 2.500 Bronze
30001-31363-017 2.500 Bronze
  Results 1 - 25 of 33 1 2