All Categories > Piston Rings and Rider Rings > TY410 Angle Cut Piston Rings > AVA5015 TY410 Angle Cut Piston Rings > Aavolyn # 56-41911-549  


Aavolyn # 56-41911-549, AVA5015 TY410 Angle Cut Piston Ring

The standard one piece piston ring is utilized by itself or in combination to seal gases and liquids in a variety of applications. Ring design and materials vary based on the product sealed, temperature, pressure, and condition of the service. AAVOLYN Engineers have experience in designing piston rings for all applications from standard air using one piece angle cut rings to high pressure specialized gas services where pressure balancing and special materials are required. Proper clearance design and selection of ring material are critical to provide quality performance and extended ring life.

  • Standard seal ring
  • 1 Piece Angle Cut Piston Ring






    • Specifications

    Cylinder/ Rod Diameter
    		18.000

    Material
    		AVA5015

    Material Description
    • Throughout the Specialty Gas industry AVA5015, is recognized as the finest material available for use in Oxygen and Argon service. It was specifically developed for Oxygen bearing gases. No other product comes close to the wear properties exhibited by this patented PTFE blend. The proprietary fillers in AVA5015 form a surface film with excellent frictional characteristics. This film increases the life of the sealing ring three to five times that of other filled PTFE.
      The specific percentage and type of filler, as well as particle size, molding procedures, and sintering cycles are critical to the development of the surface film.
    • When combined with the PBU pressure balanced piston ring & packing designs, AVA5015. significantly reduces surface generated frictional heat. Every major specialty gas manufacturer has verified the performance of this unique material over any products available on the market today. Specific application performance data can be obtained on request.
    • Substitute materials have been offered for use in Oxygen or Argon applications, resulting in reduced ring life. The glass/moly filled and straight glass filled PTFE exhibit 1/2 to 1/3 the seal life when substituted for the AAVOLYN product. Once the AVA5015 seals seat after installation, wear rates drop substantially. This proprietary material eliminates wear on the sealing surfaces such as piston grooves, cylinder walls and piston rods & limits ring wear.
    Recommended Usage: Oxygen, Argon, Air Though out the Specialty Gas Industry AVA5015 is recognized as the finest material available for Oxygen service.