All Categories > Rod and Wiper Packing > AVA47 TY210 Packing Rings > Aavolyn # 30060-21021-010  


Aavolyn # 30060-21021-010, AVA47 TY210 Packing Ring Set

Single acting radial-tangent pairs consist of a radial load ring and a tangent sealing ring. The pair act together as a seal in one direction. The Type 210 are installed in combinations depending on the discharge pressure. They keep the gas from leaking from the cylinder to atmosphere. The radial ring is pinned to the tangent or sealing ring to prevent gas from leaking at the tangent joint. The pair of rings seal at the bore and against the back side. To obtain an effective seal the finish and parallelism of the faces are critical. Proper side clearance is required for the packing to function at operating temperatures and not be restricted in the packing case groove.






Specifications

Cylinder/ Rod Diameter
1.750

Material
AVA47

Quantity
3

Material Description
AVA47 provides exceptional long life in those applications where there are hydrocarbons or liquids flowing intermittently in the gas. Standard carbon filled PTFE rings depend on riding over a coating of PTFE on the rod or the cylinder to provide minimal ring wear. In applications where solids or liquids are present and tend to remove the coating provided by standard carbon filled, AVA47 is the material of choice. By adding anti-friction materials, excellent ring life is achieved along with eliminating wear on the piston rod, piston or cylinder wall.
Recommended Applications: Lubricated Service, Wet CO2, Natural Gas, Vinyl Chloride

AVA47 Application Profile.
AAVOLYN's AVA47 PTFE blend profiled by E.I. duPont.

AVA47 filled PTFE - This proprietary material is ideally suited for lubricated and mini-lube service, especially where solids and liquids are prevalent in the gas stream. Piston rings, rider rings and rod packing manufactured from AVA47 have outperformed the standard material available in the Natural Gas Market today.